How to choose artificial board in Jinqiu knowledge

  • Detail

The main materials of decoration wood are blockboard, integrated board, particleboard, density board, decorative panel, etc. What are their uses in home decoration

Blockboard: good moisture-proof effect. The middle of the blockboard is bonded with natural wood strips, and the two sides are bonded with a very thin wooden skin. It is the most important material in decoration. It can be used as furniture, wooden doors, door jambs, heating hoods, curtain boxes, etc., with good waterproof performance

when selecting, pay attention to the internal wood should not be too broken. The surface of blockboard is usually pasted with decorative plywood. The furniture and other woodwork made with it need to go through two processes: bonding with glue and painting, so the cost is higher

integrated board: it is not easy to deform. This material is made of large-diameter logs through deep processing, which are staggered and spliced like fingers. It has superior environmental protection performance, low formaldehyde content and is not easy to deform

medium density board and particleboard: each has its own advantages and disadvantages. Particleboard is a board made of crushed natural wood into granules and pressed. MDF is formed by pressing powdered sawdust, with good flatness but poor moisture resistance. In contrast, the nail holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them again

facing multilayer board: it is easy and cheap. The number of layers is different. The commonly used three plywood depends on the raw materials. At present, veneer plywood is mainly used in home decoration, that is, very thin solid wood veneer has been pasted on the plywood in the factory. Veneer plywood is easy to use and cheap




Copyright © 2011 JIN SHI